| TECHNIBUS(tm) utilizes the latest technology in Automated Powder Coat Finishing. Each TECHNIBUS(tm) enclosure part passes through a multi-stage high pressure wash system that cleans and then coats with a phosphate for excellent powder paint adhesion and superior resistance. | Corrosion Spray Testing has been performed to ASTM Standard B117 by an independent laboratory. A 2.5 mil thickness of our standard paint withstood 840 hours of salt spray testing. By comparison, conventional wet paint of equal thickness only withstood 294 hours of salt spray testing. |
At TECHNIBUS(tm), our commitment to proper testing can be seen in our modern in-house test facility. Our testing facility allows us to verify that the components and systems we design and manufacture will meet the requirements expected. As with all power distribution systems, TECHNIBUS(tm) systems must pass rigorous performance tests, often in excess of ANSI standards, to assure that all codes and performance requirements are met. All test data is documented and kept in permanent files. |
Our lab can also test entire switchgear lineups, with associated bus duct attached, to verify proper conformance to ANSI standards. Tests include:
|
UL & CSA labeling available on 5 & 15kV applications |
| In addition to the standard enclosure configurations and range of features described, TECHNIBUS(tm) can fabricate to your specifications, special ratings and/or construction features. For more information on custom construction, contact the factory. |
1501 Raff Rd. SW 
Canton, Ohio 44710 Fax:
330-478-8377
