 |
Our power conductor material is either Copper ASTM Designation B187 or Aluminum ASTM Designation B236. TECHNIBUS(tm) conductors are designed to have sufficient cross section so as not to exceed acceptable temperature limits when operated at rated continuous current or during short circuit conditions. Maintenance free bus joints utilize splice plates of special configuration having a cross-sectional area equal to, or greater than, that of the main bus to improve current equalization. |
TECHNIBUS(tm) joints are silver-plated copper or tin-plated aluminum to maintain low contact resistance for long, trouble-free operation. Adjustable bus joints are provided to compensate for normal installation tolerances and also allow for removal of individual bus sections without disassembly of adjacent sections. |
All joints are assembled with high-strength hardware including heavy-duty, load-bearing flat washers which provide over 4000 pounds of clamping force per bolt. Bolt patterns are proportional to current rating. Belleville spring washers are standard for aluminum bus joints. All bus joints are adjustable to compensate for normal installation tolerances. |
1501 Raff Rd. SW 
Canton, Ohio 44710 Fax:
330-478-8377
